Parts by Type

print This page

End Yokes

Filters: VEHICLE CLASS = LD,
PART NUMBER SERIES SPLINE COUNT SPLINE DIA. HUB DIA. THRU HOLE C/L TO END STYLE DIFF MODEL NOTES VEHICLE CLASS BRAND
3-4-84-1 1350 1 1.496 2.250 2.000 3.500 BS U-BOLT 3-94-18X or STRAP 3-70-28X, keyway 0.375, tapered hole LD Spicer
2-4-1921 1310 10 1.178 1.438 2.469 SR No machined hub, but OD is 1.800" LD Spicer
2-4-411 1310 10 1.375 1.719 1.500 2.938 UB LD Spicer
2-4-2371 1310 10 1.375 2.000 2.000 3.438 UB LD Spicer
2-4-6011 1310 10 1.375 2.125 1.375 2.938 UB LD Spicer
2-4-7151 1310 10 1.375 2.125 1.375 2.938 UB LD Spicer
2-4-7181-1 1310 10 1.500 2.125 1.734 3.500 BS LD Spicer
3-4-2111-1 1350 10 1.125 1.552 1.500 3.000 BS LD Spicer
3-4-11711-1 1350 10 1.375 1.703 1.375 2.922 BS LD Spicer
3-4-1261-1 1350 10 1.375 1.719 2.000 3.500 BS LD Spicer
3-4-3291-1 1350 10 1.375 2.125 2.000 3.688 BS LD Spicer
3-4-1111-1 1350 10 1.375 1.750 1.812 3.312 BS LD Spicer
3-4-3951-1 1350 10 1.375 2.125 2.000 3.500 BS LD Spicer
3-4-13881-1 1350 10 1.500 2.156 2.000 3.695 BS LD Spicer
3-4-8511-1 1350 10 1.500 2.156 2.000 3.766 BS LD Spicer
3-4-1501-1 1350 10 1.500 2.250 2.063 3.530 BS LD Spicer
3-4-1441-1 1350 10 1.500 2.250 2.000 3.500 BS LD Spicer
3-4-3801-1 1350 10 1.750 2.375 1.812 3.500 BS LD Spicer
3-4-2351-1 1350 10 1.750 2.375 2.188 4.000 BS LD Spicer
3-4-1481-1 1410 10 1.375 1.938 2.000 3.688 BS LD Spicer
3-4-3941-1 1410 10 1.375 2.125 1.750 3.500 BS LD Spicer
3-4-7141 1410 10 1.375 2.500 1.938 5.750 BS LD Spicer
3-4-6561-1 1410 10 1.500 1.812 2.000 3.719 BS LD Spicer
3-4-1901-1 1410 10 1.500 2.125 2.000 3.688 BS LD Spicer
3-4-2241-1 1410 10 1.500 2.250 2.188 3.875 BS LD Spicer
3-4-2261-1 1410 10 1.500 2.312 2.000 3.688 BS LD Spicer
3-4-2941-1 1410 10 1.500 2.313 2.000 3.688 BS LD Spicer
3-4-10551-1 1410 10 1.500 2.625 2.000 3.844 BS LD Spicer
3-4-11761-1 1410 10 1.750 2.359 2.094 4.203 BS LD Spicer
3-4-1841-1 1410 10 1.750 2.375 2.188 4.188 BS LD Spicer
3-4-7031-1 1410 10 1.750 2.625 2.188 4.250 BS LD Spicer
3-4-2511-1 1410 10 1.750 2.625 2.188 4.250 BS LD Spicer
2604-10 7260 10 1.188 1.875 1.500 3.350 BS Chrysler 8.75 LD PTI
2904-10 7290 10 1.188 1.875 1.500 3.375 BS Chrysler 8.75 LD PTI
3104-10 1310 10 1.125 1.552 1.500 3.000 BS Dana 44 LD PTI
3504-10 1350 10 1.188 1.875 1.656 3.125 BS Chrysler 8.75 LD PTI
2604-10B 7260 10 1.188 1.875 1.500 3.350 UB Chrysler 8.75 Billet steel, includes u-bolts and spacer (if required) LD PTI
2904-10B 7290 10 1.188 1.875 1.500 3.375 UB Chrysler 8.75 Billet steel, includes u-bolts and spacer (if required) LD PTI
3504-10B 1350 10 1.188 1.875 1.500 3.375 UB Chrysler 8.75 Billet steel, includes u-bolts and spacer (if required) LD PTI
2-4-2611-1X 1310 10 1.250 1.875 1.500 2.938 BS LD Spicer
2-4-2611X 1310 10 1.250 1.875 1.500 2.938 UB LD Spicer
2-4-2801-1X 1310 10 1.125 1.552 1.500 3.000 BS Slinger 31875 LD Spicer
N2-4-4061X 1310 10 1.125 1.552 1.500 3.000 CV Common TC yoke for early 10 spline applications. Counterbore 0.311", Slinger 330699 LD Neapco
3-4-4421-1X 1480 10 1.500 1.938 2.000 4.031 BS Coupling shaft yoke LD Spicer
3-4-5791-1X 1480 10 1.750 2.625 2.250 4.281 BS .250 deep spline chamfer LD Spicer
3-4-5811-1X 1480 10 1.750 2.625 2.188 4.281 BS .250 deep spline chamfer LD Spicer
3-4-5821-1X 1480 10 1.969 2.625 2.250 4.406 BS LD Spicer
3-4-1211-1 1350 10 1.375 2.000 2.000 3.500 BS LD Spicer
3-4-2271-1 1410 10 1.375 2.125 2.000 3.685 BS LD Spicer
3-4-6701-1 1480 10 1.375 2.125 2.000 4.031 BS LD Spicer
3-4-3961-1 1410 10 1.500 2.125 2.000 3.688 BS LD Spicer
3-4-3111-1 1480 10 1.500 2.125 2.000 4.219 BS LD Spicer
3-4-3491-1 1410 10 1.625 2.375 2.125 3.938 BS LD Spicer
3-4-7361-1 1480 10 1.750 2.250 2.188 4.406 BS Active LD Spicer
3-4-3571-1 1480 10 1.750 2.375 2.188 4.219 BS LD Spicer
3-4-3191-1 1480 10 1.750 2.375 2.188 4.219 BS LD Spicer
3-4-11561-1 1480 10 1.750 2.500 1.922 5.109 BS Flanged end yoke, strap kit not furnished by Dana LD Spicer
3-4-13901-1 1480 10 1.750 2.500 2.000 4.000 BS LD Spicer
3-4-13911-1 1410 10 1.750 2.501 2.000 4.000 BS LD Spicer
3-4-10301-1 1480 10 1.750 2.625 2.188 4.750 BS Flanged yoke w/.250 deep spline chamfer LD Spicer
3-4-3121-1 1480 10 1.750 2.625 2.250 4.469 BS LD Spicer
3-4-2251-1 1410 10 1.972 2.594 1.844 3.969 BS LD Spicer
3-4-5441-1 1480 10 1.972 2.594 1.859 4.500 BS LD Spicer
8-4-1061 1820 10 2.500 3.500 3.234 4.375 WB LD Spicer
2-4-4021X 1310 10 1.250 1.750 2.000 3.375 CV LD Spicer
3-4-178-1X 1350 10 1.375 1.719 1.781 3.281 BS LD Spicer
3-4-2851-1X 1410 10 1.375 1.719 1.781 3.469 BS LD Spicer
3-4-4451-1X 1410 10 1.250 1.875 1.500 3.188 BS LD Spicer
3-4-5881-1X 1410 10 1.750 2.625 2.188 4.000 BS LD Spicer
3-4-5921-1X 1410 10 1.625 2.375 2.125 4.188 BS LD Spicer
3-4-6631-1X 1410 10 1.500 1.812 2.000 3.719 BS LD Spicer
3-4-1471-1 1410 10 1.375 1.719 2.000 3.703 BS LD Spicer
3-4-3541-1 1480 10 1.750 2.625 2.250 4.281 BS Active LD Spicer
3-4-9621-1 1480 10 1.750 2.750 2.250 4.281 BS LD Spicer
3304-10 1330 10 1.375 1.750 1.750 3.188 UB Same as 2-4-4071,
U-bolt type		 LD PTI
3504-101 1350 10 1.375 1.750 1.500 3.188 UB LD PTI
N2-4-2791 1310 10 1.125 1.552 1.500 3.000 UB LD Neapco
2-4-1721-1 1310 10 0.982 1.562 1.938 3.656 BS LD Spicer
2-4-3701-1 1310 10 1.188 1.562 1.500 3.000 BS LD Spicer
2-4-2901-1 1310 10 1.250 2.000 1.750 3.281 BS LD Spicer
2-4-7061 1310 10 1.250 2.000 1.750 3.281 UB LD Spicer
2-4-2671-1 1310 10 1.375 1.750 1.500 3.219 BS LD Spicer
3-4-2801 1350 10 1.170 1.375 1.406 2.406 UB LD Spicer
3-4-3761-1 1350 10 1.250 1.750 2.000 3.500 BS LD Spicer
3-4-2231-1 1350 10 1.500 2.253 2.185 3.905 BS LD Spicer
3-4-7321-1X 1410 10 1.500 2.312 2.000 3.688 BS LD Spicer
3-4-12201-1 1410 10 1.625 2.370 2.130 3.938 BS LD Spicer
3-4-2391-1 1410 10 1.960 2.625 2.062 4.125 BS LD Spicer
3-4-2161-1 1410 10 1.972 2.594 1.844 3.688 BS LD Spicer
3-4-3231-1 1480 10 1.375 2.125 1.750 3.965 BS LD Spicer
3-4-13021 1480 10 1.375 2.125 2.000 3.859 SR LD Spicer
3-4-13921-1 1480 10 1.500 1.810 2.000 4.031 BS used on Superduties mid section by the CB LD Spicer
3-4-6221-1X 1480 10 1.500 2.250 2.188 4.200 BS LD Spicer
3-4-3691-1 1480 10 1.500 2.500 2.000 4.031 BS LD Spicer
3-4-13821-1 1480 10 1.750 2.362 2.120 4.215 BS LD Spicer
3-4-3051-1 1480 10 1.972 2.598 1.859 4.525 BS LD Spicer
4-4-4211-1 1550 10 1.500 2.563 2.000 3.812 BS Coupling shaft yoke LD Spicer
4-4-4211-2 1550 10 1.500 2.563 2.000 3.812 BS Coupling shaft yoke. Attaching hdwr by OEM LD Spicer
4-4-1921-1 1550 10 1.625 2.375 2.125 3.938 BS LD Spicer
4-4-2041-1 1550 10 1.750 2.375 2.188 4.000 BS LD Spicer
4-4-6791-2 1550 10 1.750 2.500 1.915 4.115 BS Attaching hardware by OEM LD Spicer
4-4-4781-2 1550 10 1.750 2.500 1.938 4.125 BS Attaching hardware by OEM LD Spicer
4-4-4781-1 1550 10 1.750 2.500 1.938 4.125 BS LD Spicer
4-4-7861-1X 1550 10 1.750 2.500 2.000 5.750 BS Flanged end yoke. LD Spicer
4-4-2511-1 1550 10 1.750 2.500 2.250 4.188 BS LD Spicer
4-4-3581-1X 1550 10 1.750 2.625 2.234 4.672 BS .250 deep spline chamfer LD Spicer
4-4-2091-1 1550 10 1.750 2.625 2.250 4.281 BS LD Spicer
4-4-3811-1 1550 10 1.750 2.750 2.245 4.652 BS LD Spicer
4-4-1931-1 1550 10 1.750 2.625 2.250 4.281 BS LD Spicer
4-4-4071-1X 1550 10 1.962 2.625 2.266 4.266 BS LD Spicer
4-4-5061-1 1550 10 1.962 2.938 2.530 4.585 BS LD Spicer
4-4-7201-1 1550 10 1.964 2.750 1.891 4.312 BS LD Spicer
4-4-2401-1 1550 10 2.000 2.625 2.125 4.203 BS LD Spicer
4-4-6211-1 1550 10 2.000 2.625 2.250 4.281 BS LD Spicer
4-4-2451-1 1550 10 2.000 2.484 2.453 4.500 BS LD Spicer
4-4-3931-2 1550 10 2.250 3.000 3.000 5.047 BS Attaching hardware by OEM LD Spicer
4-4-3501-1 1550 10 2.250 3.500 3.000 5.125 BS LD Spicer
2-4-1731-1 1310 10 1.375 2.125 2.000 3.438 BS LD Spicer
N2-4-2671 1310 10 1.375 1.750 1.750 3.220 UB 20 DEGREES JOINT ANGLE LD Neapco
N3-4-2171-1 1350 10 1.375 1.720 1.780 3.280 BS LD Neapco
N3-4-6561-1 1410 10 1.500 1.812 2.000 3.719 BS COUPLING SHAFT STYLE LD Neapco
3104-1921 1310 10 1.178 1.438 2.469 SR No machined hub, but OD is 1.800" LD PTI
4-4-2051-1 1550 10 1.500 2.313 2.000 3.775 BS Coupling shaft yoke LD Spicer
4-4-2941 1550 10 2.000 2.750 3.000 5.063 UB LD Spicer
3-4-6901-1 1480 10 1.500 1.810 2.000 4.000 BS uses 3-70-38X strap kit LD Spicer
1-4-1201 1100 13 0.878 2.000 1.250 2.250 SR LD Spicer
2-4-3331 1310 13 0.878 2.000 1.567 2.562 SR LD Spicer
3-4-7001-1 1480 13 1.755 2.500 2.250 4.281 BS LD Spicer
4-4-2931-1 1550 13 1.755 2.375 2.250 4.031 BS LD Spicer
2-4-5411 1310 14 1.268 2.000 2.500 3.688 SR .375 Dia.set screw @ 6 OR 12, hub diameter not ground LD Spicer
2-4-1741 1310 14 1.268 2.120 1.500 2.562 SR LD Spicer
2-4-7141-1 1310 14 1.268 2.125 1.953 3.453 BS LD Spicer
3-4-13161 1350 14 1.268 0.000 0.000 2.688 SR LD Spicer
3-4-7401 1350 14 1.284 2.000 2.688 2.688 SR LD Spicer
3-4-8501-1 1350 14 1.511 2.125 2.531 4.500 BS LD Spicer
3-4-5321 1410 14 1.268 1.516 1.750 2.750 SR LD Spicer
3-4-7721-1 1410 14 1.268 2.375 2.250 4.031 BS LD Spicer
3-4-8071-1 1410 14 1.878 2.564 2.015 4.219 BS Active LD Spicer
6C-4-141 6C 14 1.922 2.375 2.183 3.500 WB Tapped holes in yoke ears LD Spicer
3-4-7571-1 1480 14 1.922 2.375 2.188 4.438 BS LD Spicer
3-4-11071-1 1480 14 1.922 2.375 2.188 4.438 BS LD Spicer
3-4-5391X 1350 14 1.284 2.000 1.438 2.688 SR LD Spicer
3-4-9561-1X 1410 14 1.268 2.250 2.125 4.031 BS LD Spicer
4-4-4811-1 1550 14 1.922 2.375 2.203 4.641 BS LD Spicer
2-4-4931 1310 15 1.010 1.594 2.656 3.562 SR LD Spicer
2-4-4921 1310 15 1.010 2.000 1.062 2.312 SR LD Spicer
2-4-8241 1310 15 1.010 2.120 1.470 2.500 SR LD Spicer
3-4-11421-1 1350 15 1.282 1.810 1.450 3.030 BS Active LD Spicer
3-4-11441-1 1350 15 1.282 1.812 1.600 3.031 BS Active LD Spicer
3-4-7311-1 1410 15 1.605 2.125 1.938 3.750 BS LD Spicer
5C-4-51 5C 15 1.605 2.123 1.932 2.820 WB Tapped holes in yoke ears LD Spicer
6C-4-71 6C 15 1.605 2.125 1.937 3.090 WB LD Spicer
3-4-9301-1 1480 15 1.605 2.125 1.938 4.000 BS LD Spicer
3-4-13601-1 1350 15 1.282 1.970 2.250 3.875 BS LD Spicer
4-4-5601-1 1550 15 1.605 2.125 1.938 4.000 BS LD Spicer
4-4-6331-1 1550 15 1.605 2.125 1.953 4.000 BS LD Spicer
4-4-4421-1 1550 15 2.005 2.875 2.680 4.655 BS LD Spicer
NOE-04-5695-A 1000 15 1.026 1.630 0.000 2.500 ISR LD Neapco
6C-4-91 6C 16 1.650 2.375 2.000 3.062 WB Tapped holes in yoke ears LD Spicer
8-4-851 1820 16 2.344 2.875 2.750 4.125 WB LD Spicer
4-4-4361-1 1550 16 2.125 3.000 3.047 5.094 BS LD Spicer
3104-17 1310 17 1.310 1.739 1.181 2.595 UB GM 8.2 LD PTI
6C-4-261 6C 17 2.289 2.750 2.500 4.030 WB Flanged yoke w/8 tapped holes in flange LD Spicer
2-4-6301 1310 18 1.215 2.120 1.500 2.562 SR LD Spicer
2-4-6341 1310 19 1.274 2.000 1.344 2.500 SR LD Spicer
2-4-5781 1310 21 1.375 2.125 1.469 2.562 SR LD Spicer
2-4-5091 1310 21 1.403 1.875 1.562 3.000 CV LD Spicer
2-4-6221 1330 21 1.403 1.906 1.719 3.594 CV LD Spicer
3-4-10591-1 1350 21 1.403 2.000 1.234 2.953 BS LD Spicer
3-4-11471-1 1410 21 1.383 2.625 3.312 4.641 BS LD Spicer
3-4-14461-1 1350 21 1.403 1.938 2.045 3.835 BS LD Spicer
3-4-13011-1X 1350 21 1.403 1.938 1.938 3.844 BS LD Spicer
2-4-7801-1 1310 21 1.383 2.250 1.650 3.115 BS LD Spicer
NOE-04-2181-A 1000 21/22 0.984 1.430 1.570 4.000 ISR PIN HOLE DISTANCE TO END OF HUB (in): 1.57
PIN HOLE SIZE (in): .232-.238 One side only		 LD Neapco
NOE-04-2135-A 1000 22 0.984 1.500 0.380 2.105 ISR PIN HOLE DISTANCE TO END OF HUB (in): .380-.400
PIN HOLE SIZE (in): .312-.318 Thru		 LD Neapco
NOE-04-2179-A 1000 22 0.984 1.430 1.570 4.000 ISR PIN HOLE DISTANCE TO END OF HUB (in): 1.57
PIN HOLE SIZE (in): .232-.238 One side only		 LD Neapco
NOE-04-2141-A 1000 22 0.984 1.430 0.500 4.000 ISR PIN HOLE DISTANCE TO END OF HUB (in): 0.5
PIN HOLE SIZE (in): .232-.238 One side only		 LD Neapco
NOE-04-2183-A 1000 22 0.984 1.430 0.690 3.440 ISR PIN HOLE DISTANCE TO END OF HUB (in): 0.69
PIN HOLE SIZE (in): .232-.238 One side only		 LD Neapco
NOE-04-2192-A 1000 22 0.984 1.430 0.500 3.300 ISR PIN HOLE DISTANCE TO END OF HUB (in): 0.5
PIN HOLE SIZE (in): .232-.238 One side only		 LD Neapco
NOE-04-2190-A 1000 22 0.984 1.430 0.690 3.220 ISR PIN HOLE DISTANCE TO END OF HUB (in): 0.69
PIN HOLE SIZE (in): .232-.238 One side only		 LD Neapco
NOE-04-2185-A 1000 22 0.984 1.430 0.690 3.650 ISR PIN HOLE DISTANCE TO END OF HUB (in): 0.69
PIN HOLE SIZE (in): .232-.238 One side only		 LD Neapco
NOE-04-2144-A 1000 22 0.984 1.630 0.050 2.500 ISR PIN HOLE DISTANCE TO END OF HUB (in): 0.5
PIN HOLE SIZE (in): .312-.318 Thru		 LD Neapco
NOE-04-2654-A 1000 22 0.984 1.500 0.000 1.940 ISR LD Neapco
NOE-04-3871-A 1000 22 0.984 1.380 2.110 ISR PIN HOLE DISTANCE TO END OF HUB (in): .38-.40
PIN HOLE SIZE (in): .314-.318 Thru
 LD Neapco
NOE-04-3872-A 1000 22 0.984 1.380 0.500 3.300 ISR PIN HOLE DISTANCE TO END OF HUB (in): 0.5
PIN HOLE SIZE (in): .232-.238		 LD Neapco
NOE-04-6032-A 1000 22 0.984 1.500 1.500 4.000 ISR PIN HOLE DISTANCE TO END OF HUB (in): 1.57
PIN HOLE SIZE (in): .232-.238		 LD Neapco
NOE-02-2125-A 1000 22 0.984 1.300 3.000 ISR SPLINE YOKE W/FLANGE
PILOT N/A
BOLT CIRCLE 2.500
M8 x 1.25 THRU
F-CL 2.400		 LD Neapco
NOE-02-2171-A 1000 22 0.984 1.600 2.500 ISR SPLINE YOKE W/FLANGE
PILOT 3.000
BOLT CIRCLE 3.375
5/16-18
F-CL 1.000		 LD Neapco
1404-22 1100 22/23 0.990 1.420 1.360 2.750 SR Use with 1453-232 or 3053-233 midship stub LD PTI
1404-231 1100 22/23 0.990 1.420 1.800 3.250 SR Use with 1453-232 or 3053-233 midship stub LD PTI
3004-231 1300 22/23 0.990 1.420 1.800 3.250 SR Use with 1453-232 or 3053-233 midship stub LD PTI
3-4-11751-1X 1410 22/23 1.527 1.889 2.678 4.425 BS Counterbore .080", Proprietary to Caterpillar LD Spicer
1204-241 1251 22/24 0.995 1.342 1.300 2.900 ISR Used on 2 piece Subaru shafts to replace the center CV section, ujoint part # 1251-22 LD PTI
3-4-10941-1 1410 23 1.260 1.565 1.609 3.562 BS LD Spicer
3-4-11811-1 1410 23 1.506 2.375 1.406 3.500 BS LD Spicer
3104-01 1310 23 1.031 1.552 1.500 3.000 BS Dana 28 Slinger 41498 LD PTI
3-4-14031-1 1480 23 1.506 2.375 1.403 3.500 BS LD Spicer
2-4-5921-1X 1210 23 1.031 1.562 1.500 3.063 BS LD Spicer
3104-231 1310 23 1.260 1.562 1.625 3.062 BS Counterbore at hub end, Same as Dana 2-4-4441-1 LD PTI
3-4-11701-1X 1410 24 1.588 2.250 2.125 4.000 BS LD Spicer
N2-4-JK02 1310 24 1.250 1.876 1.500 3.000 UB Used at differential end on 07+ Jeep JK. LD Neapco
N3-4-JK04 1350 24 1.250 1.876 1.500 3.000 UB Used at differential end on 07+ Jeep JK. LD Neapco
3104-242 1310 24 1.250 1.876 1.500 3.000 UB Used at differential end on 07+ Jeep JK. LD PTI
3504-243 1350 24 1.250 1.876 1.500 3.000 UB Used at differential end on 07+ Jeep JK. LD PTI
N2-4-JK06 1310 24 1.250 1.850 1.500 3.000 UB Jeep JK Conversion - Pinion Front LD Neapco
N3-4-JK08 1350 24 1.250 1.850 1.500 3.100 UB Dana 30 Front has 1.850 seal surface LD Neapco
1204-261 1251 24/26 1.115 1.445 1.300 3.312 ISR Used on 2 piece Subaru shafts to replace the center CVJ, 1.73" inside ear to ear LD PTI
2304-261 2351 24/26 1.115 1.445 1.300 3.312 ISR Used on 2 piece Toyota shafts with 2351-20 Ujoint. Used with 1253-261 stub. 1.84" inside ear to ear LD PTI
2604-261 7260 24/26 1.100 1.450 1.300 3.250 ISR 0 Seal hub partially machined, 2.12" between inside ears LD PTI
2604-261M 7260 24/26 1.100 1.450 1.300 3.250 ISR 0 Seal hub machined all the way, 2.12" between inside ears LD PTI
3104-25 1310 25 1.085 1.521 1.500 2.875 UB GM 8.2 LD PTI
3104-252 1310F 25 1.098 1.812 2.625 4.375 UB Ford 8 U-bolt type LD PTI
2-4-5901-1 1210 26 1.146 1.625 1.156 2.750 BS LD Spicer
2-4-7021-1 1310 26 1.146 1.500 1.469 3.000 BS LD Spicer
2-4-6561-1 1310 26 1.146 1.552 1.495 2.995 BS LD Spicer
2-4-4341 1310 26 1.146 1.552 1.500 3.000 CV LD Spicer
2-4-6781-1 1310 26 1.146 1.552 1.500 3.000 BS LD Spicer
2-4-6641-1 1310 26 1.146 1.552 1.500 3.000 BS LD Spicer
2-4-2271-1 1310 26 1.146 1.562 1.500 3.000 BS LD Spicer
2-4-8311-1 1310 26 1.146 1.844 1.370 3.235 BS Proprietary to Chrysler LD Spicer
3-4-13761-1 1350 26 1.146 1.550 1.500 3.000 BS LD Spicer
3104-02 1310 26 1.146 1.844 1.375 2.938 BS Dana 35 LD PTI
3104-03 1310 26 1.146 1.552 1.500 3.000 BS Dana 30, 44, 50 LD PTI
3304-01 1330 26 1.146 1.552 1.500 3.000 BS Dana 44 LD PTI
3504-06 1350 26 1.146 1.552 1.500 3.000 BS Dana 44 3-70-28X STRAP LD PTI
2-4-6111X 1330F 26 1.146 1.562 1.500 3.000 UB LD Spicer
2-4-7291-1X 1310 26 1.146 1.484 1.484 3.000 BS LD Spicer
2-4-7501-1X 1310 26 1.146 1.469 1.484 3.500 BS LD Spicer
2-4-8091X 1310 26 1.146 1.552 1.500 3.000 UB LD Spicer
3104-26CV 1310 26 1.146 1.552 1.500 3.000 CV LD PTI
3304-261 1330 26 1.146 1.552 1.500 3.750 BS Dana 44 03-06 Jeep Rubicon, 2-4-7791-1, no counterbore on splines LD PTI
3104-262CV 1310 26 1.146 1.614 1.500 3.000 CV DODGE/JEEP FRONT TC CV Conversion Yoke, Splines counterbored on bottom, Includes hub sleeve LD PTI
3304-262 1330 26 1.146 1.492 1.973 3.465 SR Toyota Mid-Ship Yoke snap ring style LD PTI
2-4-6411-1X 1310 26 1.146 1.453 1.500 3.000 BS LD Spicer
2-4-8701-1X 1310 26 1.146 1.500 1.465 3.000 BS LD Spicer
2-4-8541-1X 1310 26 1.146 1.500 1.736 3.270 BS LD Spicer
2-4-2461-1X 1310 26 1.146 1.552 1.500 3.000 BS LD Spicer
3104-263 1310 26 1.146 1.500 1.469 3.000 BS Same as Dana 2-4-7021-1 LD PTI
3304-03 1330 26 1.146 1.844 1.375 3.562 BS Dana 35 LD PTI
3304-263 1330 26 1.146 1.552 1.500 3.750 BS N/A 3153-302, 3153-252, 3153-254, 1.125 splines, 6mm counterbore on splines, 1" hub length LD PTI
1404-261 1100 26 1.129 1.416 1.824 3.265 SR N/A Midship end yoke, Merkur shafts, mates 1453-261 LD PTI
3104-264 1310 26 1.146 1.453 1.469 3.000 BS 0 Midship end yoke used on multiple applications. LD PTI
3104-261CV 1310 26 1.146 1.453 1.500 3.000 CV 0 CV style midship end yoke used to bolt up a open socket style CV head to a center section. LD PTI
3104-266 1310 26 1.146 1.500 1.469 2.875 SR 0 Snap ring style midship end yoke used on Nissan, Ford, Toyota shafts & more. (3153-252, 3153-302) LD PTI
3304-264 1330 26 1.146 1.552 1.312 3.500 BS N/A 3153-302, 3153-252, 3153-254, 1.125 splines, 6mm counterbore on splines, 0.85" hub length LD PTI
3104-266M 1310 26 1.146 1.450 1.469 2.875 SR 0 Same as 3104-266 but seal surface turned to 1.45" LD PTI
3104-268 1310 26 1.146 1.552 1.500 3.000 UB Dana 30, 44 takes 2-94-58X U-bolt kit, forged LD PTI
3104-267 1310 26 1.146 1.450 1.469 2.875 SR 0 Forged, PTI 26 spline midship stubs LD PTI
3504-260 1350 26 1.146 1.552 1.500 3.750 BS 3153-302, 3153-252, 3153-254, 1.125 splines 3-70-28X STRAP LD PTI
2904-27 7290 27 1.172 1.688 1.062 2.750 BS Chrysler 7.25, 8.25 LD PTI
3104-05 1310 27 1.188 1.521 1.475 3.185 BS GM 7.25 LD PTI
3104-27 1310 27 1.172 1.688 1.062 2.750 BS Chrysler 7.25, 8.25 LD PTI
3R04-01 3R 27 1.188 1.692 1.475 3.575 BS GM 7.5 Includes new pinion seal LD PTI
5C-4-91 5C 27 1.450 2.250 2.060 3.375 WB Flanged WB yoke w/tapped holes in yoke ears LD Spicer
3-4-11181-1 1480 27 1.751 2.500 2.063 4.125 BS LD Spicer
2604-27 7260 27 1.172 1.688 1.062 2.750 BS Chrysler 7.25, 8.25 LD PTI
3R04-271X 3R 27 1.170 1.942 1.287 2.866 UB GM 8.2 BOP 2-94-58X Ubolt Kit Included LD PTI
3104-76 1310 27 1.188 1.521 1.500 3.175 BS GM 7.6 FNT TRIPLE LIP DESIGN LD AAM
2-4-03952X 1330 27 1.118 1.970 1.785 3.772 BS Counterbore 0.276", Slinger 5003953 LD Spicer
3-4-14881-1XM 1410 27 1.751 2.750 2.701 4.565 BS LD Spicer
3-4-12451-1x 1480 27 1.751 2.750 2.703 4.565 BS LD Spicer
4-4-6141-1 1550 27 1.751 2.500 2.094 4.125 BS LD Spicer
4-4-5991-1 1550 27 1.751 2.750 2.400 4.250 BS .250 deep spline chamfer LD Spicer
3R04-725 3R 27 1.188 1.692 1.475 3.575 BS GM 7.25 Has sleeve / No dust slinger like 3R04-01 LD AAM
3104-07 1310 28 1.229 1.844 1.375 2.938 BS AMC 20 LD PTI
3504-02 1350 28 1.229 1.844 1.375 3.031 BS AMC 20 LD PTI
3104-08 1310 28 1.218 1.812 1.200 3.460 UB Ford 7.5 LD PTI
3104-28 1310 28 1.218 1.812 2.425 4.000 UB Ford 9 Forged / .500" Counterbore LD PTI
3304-06 1330F 28 1.218 1.812 2.425 4.000 UB Ford 9 .500" Counterbore LD PTI
3504-08 1350 28 1.218 1.812 2.425 4.000 UB Ford 9 LD PTI
3104-28A 1310 28 1.218 1.812 2.155 3.850 UB Ford 9 Billet aluminum, includes u-bolts and spacer (if required) LD PTI
3504-08B 1350 28 1.218 1.812 2.155 4.100 UB Ford 9 Billet steel, includes u-bolts and spacer (if required) LD PTI
3304-281 1330F 28 1.218 1.500 2.850 4.750 UB Fits T18,T19,T98 manual transmissions LD PTI
2-4-7031-1X 1330 28 1.229 1.844 1.375 2.938 BS LD Spicer
3304-282 1330F 28 1.218 1.812 2.425 5.000 UB Ford 9 LD PTI
2-4-6161-1 1310 28 1.229 1.844 1.375 2.938 BS LD Spicer
3-4-10351-1X 1480 28 1.875 2.625 3.000 4.875 BS Slinger 3-68-154 LD Spicer
N2-4-FD02X 1330F 28 1.235 1.810 2.420 4.030 UB Joint Angle 25 degrees LD Neapco
N2-4-FD01X 1310 28 1.235 1.810 2.420 4.030 UB Joint Angle 25 degrees LD Neapco
3104-281 1310 28 1.218 1.812 2.430 4.100 UB Ford 9 takes 2-94-28X u-bolt kit, forged LD PTI
3304-283 1330 28 1.218 1.812 2.430 4.000 UB Ford 9 in takes 2-94-28X u-bolt kit, forged LD PTI
2-4-8421-1 1330 29 1.276 1.875 1.700 3.188 BS LD Spicer
3-4-11721-1 1350 29 0.970 1.500 1.500 3.547 BS LD Spicer
3-4-14621-1 1350 29 1.276 1.810 1.495 2.995 BS LD Spicer
3-4-12211-1 1350 29 1.276 1.875 1.500 3.000 BS Active LD Spicer
4104-291 1410 29 1.276 1.710 1.500 3.200 BS LD PTI
3-4-12461-1 1350 29 1.498 1.969 2.837 4.984 BS LD Spicer
2604-29 7260 29 1.263 1.875 1.500 3.188 BS Chrysler 8.75, 9.25 LD PTI
2904-60 7290 29 1.276 1.875 1.500 3.359 BS Dana 60, 70 LD PTI
3104-29 1310 29 1.276 1.875 1.500 2.938 BS Dana 60, 70 LD PTI
3304-29 1330 29 1.276 1.875 1.500 2.938 BS Dana 60, 70 LD PTI
3504-01 1350 29 1.276 1.875 1.500 3.000 BS Dana 60, 70 LD PTI
4104-01 1410 29 1.276 1.875 1.500 3.188 BS Dana 60, 70 LD PTI
2904-29 7290 29 1.263 1.875 1.500 3.180 BS Chrysler 9.25 2970-29 LD PTI
2-4-3801X 1310 29 1.276 1.875 1.500 2.938 UB LD Spicer
3-4-13391-1X 1480 29 1.276 1.875 1.500 3.500 BS LD Spicer
3-4-8731-1 1410 29 1.276 1.875 1.500 3.188 BS LD Spicer
2-4-3781X 1310 29 1.276 1.875 1.500 2.531 UB LD Spicer
2-4-4291-1X 1330 29 1.276 1.875 1.500 2.938 BS Slinger 34592 LD Spicer
2-4-8391-1X 1310 29 1.276 1.875 1.500 2.996 BS LD Spicer
3-4-11891-1X 1410 29 1.276 1.874 1.420 3.185 BS LD Spicer
3-4-14531-1 1350 29 1.276 1.875 1.500 3.000 BS Proprietary to Ford LD Spicer
3-4-13031-2X 1350 29 1.276 1.875 1.500 3.000 BS LD Spicer
3-4-14711-1X 1410 29 1.276 1.875 1.500 3.200 BS LD Spicer
3304-291 1330 29 1.276 1.750 1.500 3.188 BS Mates with stub 3153-291 and 3153-292 (use 16-74-101 nut)
 LD PTI
3504-60 1350 29 1.276 1.875 1.500 3.375 UB Dana 60 LD PTI
3504-291 1350 29 1.276 1.710 1.500 3.188 BS Mates with stub 3153-291 and 3153-292
(use 16-74-101 nut)		 LD PTI
2-4-03950X 1330 29 1.200 1.653 1.799 3.772 BS Counterbore 0.335", Slinger 5003951 LD Spicer
2-4-03954-1X 1330 29 1.200 1.653 1.799 3.772 BS Counterbore 0.335", Slinger 5003955 LD Spicer
2-4-7921 1330 29 1.276 0.000 1.500 3.094 UB Coupling yoke LD Spicer
3-4-5721-1 1350 29 1.276 1.875 1.500 3.000 BS LD Spicer
3504-60B 1350 29 1.276 1.875 1.500 3.375 UB Dana 60 Billet steel, includes u-bolts and pinion nut LD PTI
2904-291 7290 29 1.263 1.875 1.500 3.180 UB Mopar 8.75 uses 2-94-58X u-bolt kit, forged LD PTI
3104-291 1310 29 1.276 1.875 1.500 3.000 UB Dana 44, 60 takes 2-94-58X u-bolt kit, forged LD PTI
3504-293 1350 29 1.276 1.875 1.500 3.000 UB Dana 44, 60, 70 takes 3-94-18X u-bolt kit, 1.900 clearance for nut, forged LD PTI
3504-292 1350 29 1.263 1.875 1.500 3.000 UB Mopar 8.75, 9.25 takes 3-94-18X u-bolt kit, 1.650" clearance for nut, forged LD PTI
3504-07 1350 30 1.328 1.739 1.200 3.375 UB GM 8.875 LD PTI
3104-09 1310 30 1.328 1.739 1.170 2.850 BS GM 8.875 Requires strap kit 2-70-28X LD PTI
3504-04 1350 30 1.312 2.110 1.150 3.125 BS GM 9.5 Has speedy sleeve on hub. LD PTI
3504-05 1350 30 1.590 2.200 1.642 3.913 BS GM 10.5 Requires strap kit 3570-20
Use Pinoin Seal 2286 to replace yokes with 2.372 hub diameter.		 LD PTI
3R04-02 3R 30 1.312 1.940 1.150 3.375 BS GM 8.5, 9.25 LD PTI
3R04-03 3R 30 1.312 2.110 1.150 3.375 BS GM 8.6 LD PTI
3304-05 1330F 30 1.312 1.812 1.275 3.145 UB Ford 8.8 LD PTI
3504-07B 1350 30 1.328 1.739 1.184 3.250 UB GM 8.875 Billet steel, includes u-bolts and spacer (if required) LD PTI
3104-30 1310 30 1.312 1.940 1.150 3.160 UB GM 8.5 LD PTI
3304-30 1330 30 1.328 1.739 1.190 2.600 UB GM 8.875 LD PTI
3-4-8691-1X 1350 30 1.312 1.940 1.156 3.125 BS LD Spicer
3104-301 1310 30 1.328 1.739 1.181 2.598 UB GM 8.5 Vette LD PTI
4104-04 1410 30 1.590 2.370 1.630 3.750 BS GM 10.5 Requires strap kit 3570-20,
Includes new pinion seal (14 bolt GM)		 LD AAM
3R01-292 3R 30 1.312 2.110 1.150 3.125 SER Chrysler 9.25 Front Serrated Flange LD PTI
3504-85 1350 30 1.312 1.940 1.150 3.400 BS GM 8.5 Similar to 3504-04 but without speedy sleeve on hub LD AAM
4104-05 1410 30 1.312 1.940 1.140 3.375 BS GM 9.5 TRIPLE LIP DESIGN LD AAM
4804-30 1480 30 1.590 2.370 1.630 3.900 BS GM 11.5/10.5 Without Dampner / Has speedy sleeve LD AAM
4-4-6191-1 1550 30 1.939 2.752 2.063 4.125 BS LD Spicer
3-4-8681-1 1350 30 1.312 1.940 1.150 3.125 BS GM 9.5 See 3504-85 LD Spicer
3104-302 1310 30 1.276 1.732 1.870 3.375 SR N/A infiniti center yoke LD PTI
N2-4-GM01X 1310 30 1.328 1.740 1.190 2.590 UB LD Neapco
N2-4-GM02X 1330 30 1.328 1.740 1.190 2.700 UB LD Neapco
N2-4-GM03X 1310 30 1.312 1.940 1.150 3.160 UB LD Neapco
N3-4-0880-1X 1350 30 1.312 1.940 1.150 3.190 BS LD Neapco
3104-303 1310 30 1.312 1.940 1.375 2.850 UB GM 12 bolt takes 2-94-28X u-bolt kit, forged LD PTI
3504-302 1350 30 1.312 1.940 1.160 3.180 UB GM 8.5 takes 3-94-18X u-bolt kit, forged LD PTI
3504-301 1350 30 1.312 1.812 1.300 3.145 UB Ford 8.8 takes 3-94-18X u-bolt kit, forged LD PTI
4104-303 1410 30 1.590 2.200 1.650 3.950 UB GM 10.5, 14 bolt takes 3-94-18X u-bolt kit, forged LD PTI
3504-09 1350 31 1.343 1.812 1.640 3.500 BS Ford 10.25, 10.5 LD PTI
4104-03 1410 31 1.343 1.812 1.640 3.525 BS Ford 10.25, 10.5 1993 and up "long" 10.25 LD PTI
3504-03 1350 31 1.343 1.812 1.262 3.143 BS Ford 10.25 LD PTI
3304-07 1330F 31 1.343 1.812 1.262 3.150 UB Ford 10.25 Double check length thru the hole LD PTI
3304-08 1330F 31 1.343 1.812 1.640 3.500 UB Ford 10.25 Double check length thru the hole LD PTI
4-4-5941-1X 1550 31 2.008 2.625 2.297 4.165 BS Counterbore 0.380" LD Spicer
4-4-5091-1 1550 31 2.008 3.000 2.766 4.938 BS LD Spicer
4104-31 1410 31 1.380 1.890 2.000 3.700 UB Counter Bore .21
Borg Warner TC 1356		 LD PTI
3504-31 1350 31 1.380 1.890 2.000 3.540 UB Counter Bore .21
Borg Warner TC 1356		 LD PTI
3-4-13731-1 1350 31/32 1.380 1.875 4.094 5.594 BS LD Spicer
3503-324 1350 31/32 1.380 1.885 4.094 5.594 BS Replaces 3-4-13211-1 which was a bolt-on. This part has a welch plug that can be removed to make it a bolt on. Use with strap kit 3570-20. LD PTI
2-4-4191-1 1310 32 1.401 2.125 2.000 3.438 BS Replaces 2-4-4191 u-bolt style LD Spicer
2-4-5441 1330 32 1.401 1.875 2.000 3.875 CV Discontinued by Dana 04/2018 LD Spicer
3-4-6211-1 1350 32 1.401 2.125 2.000 3.500 BS NP203, NP205, NP208, NP241 LD Spicer
3-4-7241-1 1350 32 1.401 2.125 2.719 4.750 BS LD Spicer
3-4-13511-1 1410 32 1.380 1.886 2.000 3.675 BS LD Spicer
3-4-10951-1 1410 32 1.401 2.125 2.000 3.688 BS NP 203 and NP 205 LD Spicer
3-4-13351-1X 1480 32 2.114 3.000 2.250 4.281 BS LD Spicer
2604-32 7260 32 1.401 2.125 2.000 3.625 BS Fits 203/205 transfer case LD PTI
3104-321CV 1310 32 1.401 1.943 2.000 3.875 CV CV conversion yoke for 07 and up Jeep JK on front or rear output,
Splines counterbored top and bottom,
Includes hub sleeve		 LD PTI
3104-322CV 1310 32 1.401 1.943 2.000 3.875 CV 03-06 Jeep Rubicon with 241 transfer case LD PTI
3104-32CV 1310 32 1.401 1.875 2.000 3.875 CV TC NP 203/205 Same as 2-4-5341, Counterbored 0.30" LD PTI
2-4-5141-1 1310 32 1.401 2.000 2.000 3.438 BS LD Spicer
4-4-7251-1X 1550 32 2.070 2.875 2.781 2.875 BS LD Spicer
4-4-7001-1X 1550 32 2.114 3.000 2.250 4.312 BS LD Spicer
N2-4-JK01 1310 32 1.401 1.943 2.000 3.443 UB Used at transfer case on 07+ Jeep JK. Front and rear non-CV 1310 yoke.
LD Neapco
N2-4-5341 1310 32 1.401 1.880 2.000 3.880 CV Joint Angle 13 degrees LD Neapco
10016266 1310 32 1.401 1.943 2.000 4.000 CV Dana 44 07-18 Ultimate Dana 44 Front Axle, Converts Transmission Companion Flange to End Yoke LD Spicer
3-4-10461-1X 1410 34 1.790 2.625 2.188 4.031 BS LD Spicer
3-4-10471-1X 1480 34 1.790 2.625 2.188 4.281 BS LD Spicer
3-4-12101-1X 1480 34 1.790 2.375 2.188 4.219 BS Dana 135 / 150 LD Spicer
3-4-7261-1X 1480 34 1.790 2.562 2.750 5.562 BS Flanged end yoke, strap kit not furnished by Dana LD Spicer
3-4-8051-1X 1480 34 1.774 2.500 2.250 4.469 BS LD Spicer
3-4-10261-1 1480 34 1.790 2.625 2.188 4.281 BS LD Spicer
3-4-8061-1X 1410 34 1.774 2.500 2.250 4.188 BS LD Spicer
3-4-13971-1X 1410 34 1.790 2.565 2.750 5.125 BS Proprietary to GM LD Spicer
3-4-13931-1 1480 34 1.790 2.625 2.188 4.281 BS LD Spicer
4-4-4111-1X 1550 34 1.774 2.500 2.260 4.700 BS LD Spicer
4-4-6961-1X 1550 34 1.790 2.375 2.200 4.000 BS LD Spicer
4-4-4801-1X 1550 34 1.790 2.562 2.750 5.156 BS LD Spicer
4-4-4801-2X 1550 34 1.790 2.562 2.750 5.156 BS Attaching hardware by OEM LD Spicer
4-4-3861-1X 1550 34 1.790 2.562 2.790 5.125 BS LD Spicer
4-4-04238-1X 1550 34 1.790 2.565 2.760 5.525 BS LD Spicer
4-4-5611-1X 1550 34 1.790 2.625 2.185 4.275 BS LD Spicer
55-4-01480-1X 1480 34 1.790 2.564 2.760 4.870 BS Replaced 5001480 LD Spicer
55-4-101-1X 1480 34 1.790 2.564 2.760 4.870 BS For 9 x 3" Brake" - Active LD Spicer
55-4-41-1X 1480 34 1.790 2.375 2.188 4.219 BS LD Spicer
2104-341 1210 34 1.102 1.535 2.421 SR BMW X3, X4 Threaded M39x1.5 LD PTI
3-4-9251-2 1410 35 1.525 2.500 1.938 3.750 BS LD Spicer
3-4-7151 1410 35 1.525 2.500 1.938 5.750 BS LD Spicer
3504-35A 1350 35 1.515 2.125 2.100 4.000 UB Ford 9 Billet aluminum, includes u-bolts and pinion nut LD PTI
3504-35B 1350 35 1.515 2.125 2.100 4.000 UB Ford 9 Billet steel, includes u-bolts and pinion nut LD PTI
3-4-5191-1 1410 35 1.525 2.125 2.000 3.688 BS LD Spicer
3-4-6691-1 1480 35 1.525 2.125 2.000 4.031 BS LD Spicer
3504-35 1350 35 1.515 2.125 2.100 4.000 UB Ford 9 takes 3-94-18X u-bolt kit, forged LD PTI
2-4-8061 1310 36 0.878 1.375 1.000 2.562 SR LD Spicer
3-4-18183-1 1480 36 1.567 2.156 2.000 4.022 BS LD Spicer
4-4-7111-1X 1550 36 2.364 3.000 2.688 5.078 BS LD Spicer
3-4-11081-1X 1410 37 1.609 2.500 2.000 4.312 BS Dana 80 Forged LD Spicer
4104-02 1410 37 1.609 2.500 2.000 4.312 BS Dana 80 LD PTI
4804-01 1480 37 1.609 2.500 2.000 4.328 BS Dana 80 LD PTI
4104-02F 1410 37 1.609 2.500 2.000 4.312 BS Dana 80 Forged, Ford LD AAM
5504-01 1550 37 1.609 2.500 2.000 4.406 BS Dana 80 LD PTI
3-4-8781-1 1480 38 1.998 2.750 2.125 4.156 BS LD Spicer
4-4-4611-1 1550 38 1.998 2.750 1.984 4.156 BS LD Spicer
4-4-4611 1550 38 1.998 2.750 1.984 4.156 UB LD Spicer
4-4-4491-1 1550 38 1.998 2.750 2.125 4.047 BS LD Spicer
4-4-7341-1 1550 38 1.998 2.750 2.125 4.141 BS LD Spicer
4-4-6101-1 1550 38 1.998 2.750 2.125 7.031 BS Flanged end yoke. LD Spicer
4-4-6981-1X 1550 38 1.998 3.000 2.125 4.500 BS LD Spicer
4-4-4611-2 1550 38 1.998 2.750 1.984 4.156 BS Attaching hardware by OEM LD Spicer
3-4-11061-1X 1480 39 2.024 2.625 2.250 4.344 BS LD Spicer
3-4-13061-1X 1480 39 2.024 2.625 2.250 4.344 BS LD Spicer
3-4-13081-1X 1480 39 2.024 3.000 2.281 4.344 BS LD Spicer
3-4-06976-1X 1480 39 2.024 3.000 1.832 3.878 BS S110 Replaced 3-4-14841-1X & 5006976, Fit Ford S110 LD Spicer
4-4-5961-1X 1550 39 2.024 2.625 2.255 4.281 BS LD Spicer
4-4-7571-1X 1550 39 2.024 3.000 2.297 4.281 BS LD Spicer
4-4-5691-1X 1550 39 2.024 2.625 2.255 4.281 BS LD Spicer
4-4-7551-1X 1550 39 2.024 2.625 2.250 4.266 BS LD Spicer
3-4-9821-1 1350 46 1.194 2.000 2.203 3.938 BS LD Spicer
8-4-1151X 1820 46 2.375 2.953 2.375 3.938 WB Includes speedometer gear LD Spicer
8-4-1161X 1820 46 2.375 2.953 2.375 3.938 WB Assy incl. electronic pickup wheel LD Spicer
3-4-14401-1XM 1480 46 2.372 3.000 3.391 5.500 BS Proprietary to Caterpillar LD Spicer
4-4-4451-1X 1550 46 2.372 3.000 3.375 5.500 BS LD Spicer
4-4-7231-1M 1550 46 2.372 3.000 3.734 6.193 BS Proprietary to Caterpillar LD Spicer
4-4-7211-1M 1550 46 2.372 3.020 3.734 6.193 BS Counterbore 0.790", proprietary to Caterpillar LD Spicer
4-4-4761-1 1550 46 2.372 3.125 3.047 5.063 BS Counterbore 0.500" LD Spicer